Shaft Kit - STC Italia - Spearfishing Tech Components

Go to content
"Shaft Kit" for "X-Power" System


"Shaft Kit" for "X-Shaft free" or "Naked shafts"

It is a complete kit dedicated to "X-Power" 2.0 and 3.0 consisting of a single element in acetal resin. In the front there is space for the "throat" of the shaft that allows the centering of the shaft in the absence of the centering washer. In the lower part is obtained the housing of the special dynamic sealing seal. The terminal may be inspected at any time to verify the integrity of the sealing element. There is no need for specific tools to disassemble the terminal; just unscrew the element from the fly to proceed with the inspection of the section containing the lip seal. All operations can be performed with the gun unarmed and under pressure, to allow the spearfisherman not to interrupt the fishing journey.
"Shaft Kit" for "X-Shaft free" or "Nacked shafts"...


"Shaft Kit" for standard shafts (with STC Italia tail and washer)

It is a complete kit dedicated to "X-Power" 2.0 and 3.0 consisting of a single element in acetal resin. In the front there is space for the "throat" of the shaft entrance and the seat of the central washer. In the lower part is obtained the housing of the special dynamic sealing seal. The terminal may be inspected at any time to verify the integrity of the sealing element. There is no need for specific tools to disassemble the terminal; just unscrew the element from the fly to proceed with the inspection of the section containing the lip seal. All operations can be performed with the gun unarmed and under pressure, to allow the fisherman not to interrupt the fishing journey.
"Shaft Kit" for standard shafts...


"Shaft Kit Mongoose" for standard shafts ... the 3rd way

It is a complete kit dedicated to "X-Power" 2.0 and 3.0 consisting of two elements in acetal resin. In the front there is space for the compartment to accommodate the titanium shutter (3.0 gr.) and the seal seal (OR) while the lower part acts as a "floor" for the seal housed in the upper module. The terminal may be disassembled and inspected at any time to verify the integrity of the sealing element. There is no need for specific tools to disassemble the terminal; just unscrew the first part of the terminal to proceed with the inspection of the section containing the OR seal. All operations can be performed with the gun unarmed and under pressure, to allow the fisherman not to interrupt the day of fishing.
"Mongoose" project ... the 3rd way...


ADDRESS:

STC Italia di Claudia Cerasomma
Via S.Tommaso, 13
55100 Lucca (LU) - Toscana - Italia
VAT number: IT 0172874 046 3
Fiscal code: CRS CLD 72C67 E715 V
SDI Code (e-invoice): KRRH6B9
OPENING TIME:

Monday - Friday (09.00/12.30 - 15.00/18.30)
Saturday ‚Äč 09.00/12.30
PHONE NUMBERS:

Phone (Office): +39 0583 56268
Mobile (Commercial): +39 335 6918764
Mobile (Tech): +39 335 6228162
E-MAIL ADDRESSES:

Tech dept.: tech@stcitalia.net
P.E.C.: stcitalia@pec.playnet.it
Graphics and Development: HF PRO SOFT Software & Consulting - Lucca (LU)
Back to content